List of products by supplier: DPE Kart Technology
DPE Kart Technology
-
AvailableAlfano 6 2T Data Logger Kit
ALFANO 6 2T (2 Temperature Ports) - Available with Head Temperature Sensor or Water Temperature Sensor This unit is supplied with only 1 sensor please choose your 2nd sensor and add this to your cart Please note: The Dual Extension cable is not included in this price. You will need to add this cable to your purchase if you wish to run 2 sensors.
ALFANO 6 2T (2 Temperature Ports) - Available with Head Temperature Sensor or Water...
ALFANO 6 2T (2 Temperature Ports) - Available with Head Temperature Sensor or Water Temperature Sensor This unit is supplied with only 1 sensor please choose your 2nd sensor...
-
Available Online onlyAlfano 6 Expansion Box 12
Alfano 6 Expansion Box 12The BOX12 expansion module allows for highly comprehensive data acquisition when used with the Alfano 6 range of lap timers. The huge range of sensor inputs allows you to monitor every aspect of your kart and engine for improvments. Integral 3 axis G-force sensor allows logging of braking, acceleration & cornering forces. Suitable for use with Alfano 6 unit
Alfano 6 Expansion Box 12The BOX12 expansion module allows for highly comprehensive...
Alfano 6 Expansion Box 12The BOX12 expansion module allows for highly comprehensive data acquisition when used with the Alfano 6 range of lap timers. The huge range of sensor...
-
AvailableAlfano Exhaust Gas Temperature Sensor
Alfano Exhaust Gas Temperatue Sensor - 45cm K-Type
Alfano Exhaust Gas Temperatue Sensor - 45cm K-Type
Alfano Exhaust Gas Temperatue Sensor - 45cm K-Type
-
AvailableAlfano Head Temp K-Type Sensor
Alfano Head Temp K-Type Temperature Sensor 45cm
Alfano Head Temp K-Type Temperature Sensor 45cm
Alfano Head Temp K-Type Temperature Sensor 45cm
-
Available Online onlyAlfano Lambda Sensor + Weld In Socket
Alfano Lambda Sensior including weld in socket 30cm LAMBDA Sensor - enables tuning lights modeThe optimal value of carbaration is obtained between 85 to 90 (higher power). A value in the range of 1.10 is a mixture too lean. This sensor will help you tune your engine to produce the ideal power throughout the race. This sensor must be used with an extension cable of type "K".
Alfano Lambda Sensior including weld in socket 30cm LAMBDA Sensor - enables tuning...
Alfano Lambda Sensior including weld in socket 30cm LAMBDA Sensor - enables tuning lights modeThe optimal value of carbaration is obtained between 85 to 90 (higher power). A...
-
AvailableAlfano Water Temp Extension Cable NTC
This extention cable caters for ‘NTC’ type sensors including – water temp, head temp Suitable for BX4, BX10, PRO III evo, ALFANO 6 Extension cable length 135 cm.
This extention cable caters for ‘NTC’ type sensors including – water temp, head temp...
This extention cable caters for ‘NTC’ type sensors including – water temp, head temp Suitable for BX4, BX10, PRO III evo, ALFANO 6 Extension cable length 135 cm.
-
AvailableAlfano Water Temp Sensor NTC
Alfano Water NTC Type Temperature Sensor Maximum Temperature: 180°C / 356°F Thread: Metric 10mm, Pitch of 1mm Length: 40cm / 15.7inch Important note: Use with an extension
Alfano Water NTC Type Temperature Sensor Maximum Temperature: 180°C / 356°F Thread:...
Alfano Water NTC Type Temperature Sensor Maximum Temperature: 180°C / 356°F Thread: Metric 10mm, Pitch of 1mm Length: 40cm / 15.7inch Important note: Use with an extension
-
AvailableArrow Brake Pad Safety Pin
Arrow / Dent Brake Pad Safety Pin Springclip 98 Billet suitable for 2 and 4 spot calipers
Arrow / Dent Brake Pad Safety Pin Springclip 98 Billet suitable for 2 and 4 spot calipers
Arrow / Dent Brake Pad Safety Pin Springclip 98 Billet suitable for 2 and 4 spot calipers
-
AvailableArrow Brake Pads 11mm Soft Red
Brake Pads Kartech/Arrow 11mm Soft Red Set
Brake Pads Kartech/Arrow 11mm Soft Red Set
Brake Pads Kartech/Arrow 11mm Soft Red Set
-
AvailableArrow Nosecone FP7 Mounting Kit
This is the mounting kit required to fit the FP7 & MK14 2015 nosecone to the kart. This item comes with all necessary bolts/brackets.
This is the mounting kit required to fit the FP7 & MK14 2015 nosecone to the kart....
This is the mounting kit required to fit the FP7 & MK14 2015 nosecone to the kart. This item comes with all necessary bolts/brackets.
-
AvailableAxle Bearing Grub Screws
Axle Bearing Grubscrews suits 30, 40 or 50mm Axle Bearings
Axle Bearing Grubscrews suits 30, 40 or 50mm Axle Bearings
Axle Bearing Grubscrews suits 30, 40 or 50mm Axle Bearings
-
AvailableAxle Collar - Drive Bearing 30mm
Kartech Axle Collar Drive Bearing 30mm. Sold individually This single piece axle collar slips over the shoulder of the bearing and contains an inner o'ring meaning that the collar stays on the kart when changing axle.
Kartech Axle Collar Drive Bearing 30mm. Sold individually This single piece axle...
Kartech Axle Collar Drive Bearing 30mm. Sold individually This single piece axle collar slips over the shoulder of the bearing and contains an inner o'ring meaning that the...