List of products by supplier: DPE Kart Technology
DPE Kart Technology
-
Available Online onlyAlfano Lambda Sensor + Weld In Socket
Alfano Lambda Sensior including weld in socket 30cm LAMBDA Sensor - enables tuning lights modeThe optimal value of carbaration is obtained between 85 to 90 (higher power). A value in the range of 1.10 is a mixture too lean. This sensor will help you tune your engine to produce the ideal power throughout the race. This sensor must be used with an extension cable of type "K".
Alfano Lambda Sensior including weld in socket 30cm LAMBDA Sensor - enables tuning...
Alfano Lambda Sensior including weld in socket 30cm LAMBDA Sensor - enables tuning lights modeThe optimal value of carbaration is obtained between 85 to 90 (higher power). A...
-
AvailableAlfano Water Temp Extension Cable NTC
This extention cable caters for ‘NTC’ type sensors including – water temp, head temp Suitable for BX4, BX10, PRO III evo, ALFANO 6 Extension cable length 135 cm.
This extention cable caters for ‘NTC’ type sensors including – water temp, head temp...
This extention cable caters for ‘NTC’ type sensors including – water temp, head temp Suitable for BX4, BX10, PRO III evo, ALFANO 6 Extension cable length 135 cm.
-
AvailableAlfano Water Temp Sensor NTC
Alfano Water NTC Type Temperature Sensor Maximum Temperature: 180°C / 356°F Thread: Metric 10mm, Pitch of 1mm Length: 40cm / 15.7inch Important note: Use with an extension
Alfano Water NTC Type Temperature Sensor Maximum Temperature: 180°C / 356°F Thread:...
Alfano Water NTC Type Temperature Sensor Maximum Temperature: 180°C / 356°F Thread: Metric 10mm, Pitch of 1mm Length: 40cm / 15.7inch Important note: Use with an extension
-
AvailableArrow Brake Pad Safety Pin
Arrow / Dent Brake Pad Safety Pin Springclip 98 Billet suitable for 2 and 4 spot calipers
Arrow / Dent Brake Pad Safety Pin Springclip 98 Billet suitable for 2 and 4 spot calipers
Arrow / Dent Brake Pad Safety Pin Springclip 98 Billet suitable for 2 and 4 spot calipers
-
New! AvailableArrow Brake Pads 11mm Soft Red
Brake Pads Kartech/Arrow 11mm Soft Red Set
Brake Pads Kartech/Arrow 11mm Soft Red Set
Brake Pads Kartech/Arrow 11mm Soft Red Set
-
AvailableArrow Nosecone FP7 Mounting Kit
This is the mounting kit required to fit the FP7 & MK14 2015 nosecone to the kart. This item comes with all necessary bolts/brackets.
This is the mounting kit required to fit the FP7 & MK14 2015 nosecone to the kart....
This is the mounting kit required to fit the FP7 & MK14 2015 nosecone to the kart. This item comes with all necessary bolts/brackets.
-
AvailableAxle Bearing Grub Screws
Axle Bearing Grubscrews suits 30, 40 or 50mm Axle Bearings
Axle Bearing Grubscrews suits 30, 40 or 50mm Axle Bearings
Axle Bearing Grubscrews suits 30, 40 or 50mm Axle Bearings
-
AvailableAxle Collar - Drive Bearing 30mm
Kartech Axle Collar Drive Bearing 30mm. Sold individually This single piece axle collar slips over the shoulder of the bearing and contains an inner o'ring meaning that the collar stays on the kart when changing axle.
Kartech Axle Collar Drive Bearing 30mm. Sold individually This single piece axle...
Kartech Axle Collar Drive Bearing 30mm. Sold individually This single piece axle collar slips over the shoulder of the bearing and contains an inner o'ring meaning that the...
-
AvailableAxle Collar - Kartech
Kartech Axle Collars - Available in 30mm, 40mm and 50mm Sold individually
Kartech Axle Collars - Available in 30mm, 40mm and 50mm Sold individually
Kartech Axle Collars - Available in 30mm, 40mm and 50mm Sold individually
-
AvailableAxle Key 6mm 3 Peg
Axle Keys Kartech 3 Peg 6mm x 59mm x 6mm to suit 30mm Axle - Pack of 4
Axle Keys Kartech 3 Peg 6mm x 59mm x 6mm to suit 30mm Axle - Pack of 4
Axle Keys Kartech 3 Peg 6mm x 59mm x 6mm to suit 30mm Axle - Pack of 4
-
New! AvailableAxle Key Anti Slip - Kartech
Axle Key Anti Slip - Kartech 50mm 2 Peg
Axle Key Anti Slip - Kartech 50mm 2 Peg
Axle Key Anti Slip - Kartech 50mm 2 Peg
-
AvailableB10EG Spark Plug
B10EG NGK Spark Plug Suitable for Mini Rok Engines
B10EG NGK Spark Plug Suitable for Mini Rok Engines
B10EG NGK Spark Plug Suitable for Mini Rok Engines